The Blyat attaches to our Atlas adapters, making them compatible with most suppressors on the market. These have 1 1/16”wrench flats on the rear; you can use a crows foot wrench, or our Atlas Wrench. The Blyat muzzle devices are designed to face mount on 24 and 26mm threads, helping to solve many common AK alignment issues.
- Black Nitride Finish
- Atlas and Atlas XL Compatible
- Plan B Compatible
- Shims Included
| 26×1.5LH | 2.5 oz | 2.4″ | 1.85″ |
| 24×1.5 | 2.7 oz | 2.4″ | 1.725″ |
Always use an alignment rod to ensure that the entire system is set up correctly.
To install your muzzle device, first make sure all surfaces are clean. Dry fit your muzzle device on your barrel with and without shims, and ensure proper alignment. Once you have the muzzle device aligned, you can rockset and torque it onto your barrel, again checking alignment. Torque the muzzle device to approximately 30 ft lbs. When attaching your silencer to your muzzle device, ensure that all threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment again. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly.
If you are unsure of how to properly install and align your muzzle device or suppressor, take it to a qualified gunsmith.
